The Quested SB10R Active Sub-Woofer & 1U Stereo Powered Controller – Designed to complement all of the full-range monitors in the S-Series (S6r, S7r & S8r). The SB10R will extend the system frequency response down to 20 Hz and increase the system’s maximum spl.
The filter bypass on the left channel optimises the SB10R’s performance when it is used as a dedicated LFE monitor in a multi-channel system. With the 2-in 2-out bass management, a single SB10R can reinforce a stereo pair of full range cabinets.
A long throw 10″ cast chassis driver is mounted in a tuned cabinet constructed of ash veneered 26 mm MDF.
Tradition is broken in that the matched 215W RMS amplifier and 2-channel SB10R controller are housed in a separate, single 1U rack space unit. Due to this Remote Power, the electronics do not suffer the adverse effects caused by the LF vibrations that are created by the drive unit. Calibration and operation of the SB10R controller are easily achieved in comfort with the unit sited close to hand.
- Size (WxHxD): 617(w) x 333(h) x 290(d) mm
- Weight: 19.8 Kg
- Driver: Bass cone 1 x 250 mm (10″)
- Maximum SPL: 110 dB (c) continuous pink noise
- Sensitivity: Dependent on controller settings
- Frequency Response: Set by controller
- Input Connector: 1 pair gold plated binding posts
- Nominal Impedance: 3.3 Ohm