Description
The Barefoot Footprint 01 Gen2 is a fully tri-amplified active 3-way speaker that shares the same Barefoot signature designs — Dual-Force™ technology opposing sub woofers, dual ring radiator tweeter and Multi-Emphasis Monitor Emulation™ technology — as the MicroMain and MasterStack monitor lines. The Gen2 takes performance even further, incorporating advanced technologies and refinements that elevate both technical capability and sonic accuracy.
What’s New for Gen2:
- Tweeter: 1-inch ring radiator, aluminum phase plug, high magnetic flux motor
- Amplifier: 3-way 60/150/500 Watts
- Crossover: Fully active
- MF Driver: 5″ aluminum cone, aluminum phase plug. 32mm voice coil, high magnetic flux motor
- LF Driver: Dual 8-inch aluminum woofers
- Advanced SPOC (Spectrally Optimized Conversion) DSP platform, which preserves high-frequency detail by introducing analog crossover filtering before digital conversion. This innovation dramatically improves signal-to-noise ratio, clarity, and resolution while maintaining ultra-low latency.
- Housed in a refined sealed cabinet with increased volume, optimized bracing, and enhanced damping
- Wall Mount Inserts
Reasons to choose the Barefoot Footprint 01 Gen2:
- Dual-Force Technology with two opposing 8-inch aluminium subwoofers that cancel vibration distortion and extend bass response up to 36 Hz.
- Fully tri-amplified and active Gen2 technology with redesigned transducers that increase power and dynamic range in demanding sessions.
- Innovative DSP with SPOC technology that optimises the signal-to-noise ratio by 15 dB and maintains a low latency of just 3 milliseconds.
- Ideal for medium-sized to large studios looking for extended bass response.
Barefoot Footprint 01 Gen2 Specifications:
- Class D amplifiers
- Fully Tri-amplified 3-way active monitor with MEME™ Technology
- All-new DSP optimizes performance
- Patented SPectrally Optimized Conversion (SPOC™) Technology: An analogue crossover positioned before the analogue-to-digital converter, providing 5 additional bits of resolution and a 15 dB improvement in the signal-to-noise ratio, resulting in greater sonic transparency.
- MEME technology gives you 4 speaker voice models for easy secondary reference
- Hi-Fi: Emulates hi-fi systems.
- Flat: Bypasses the DSP.
- OldScl (Yamaha NS-10M): Emulates the “wonderful” Yamaha NS-10 monitors.
- Cube (Auratone): Emulates Auratone Cube monitors.
- Input Impedance: 20K Ohm impedence
- Frequency Response: 36Hz – 40kHz (±3dB), 39Hz – 30kHz (±1dB)
- Bass Response: -3 dB @ 36Hz, Q = 0.762/ Slope = 18 dB/octave
- Cabinet: 12,8 litres total internal volume, compound radius baffle, tensioned extra thick machined aluminum faceplate
- Crossover Frequencies: 170 / 3600 Hz (Active crossover between drivers)
- Tweeter: 1″ dual-ring radiator, high magnetic flux motor, rear waveguide chamber Amplifier: 60W
- Midranges: 5” Aluminum cone, high magnetic flux motor. Amplifier: 150W
- Woofers: Dual-Force 8” aluminum cone high magnetic flux motors +/- 9.5 mm linear excursion. Amplifier: 500W
- AC Power Input: 85 VAC to 265 VAC
- Power Consumption: Idle: 12W, Maximum: 1000W
- Weight: Speaker: 40.4 lbs each (18,3 kg) / Shipping: 51 lbs each (20.4 kg)
- Dimensions HxWxD: Cabinet: 14.25 x 10.20 x 13.63 inches (362 x 259 x 346 mm)
- Manual here.
Frequently Asked Questions (FAQ):
- Are the Barefoot Footprint 01 Gen2 monitors sold individually or as a pair?
The Footprint 01 monitors are sold as a pair. The listed price is for the pair.
- What are the differences between the Barefoot Footprint 01 Gen2, the 02 Gen2 and the 03?
Although all three models are active 3-way monitors featuring MEME and SPOCK technology, they are designed to meet different needs. The Footprint 01 Gen2 is the most powerful of the three, featuring two 8-inch Dual-Force woofers, a 5-inch midrange driver and a 1-inch Dual Ring Radiator tweeter. With 170 W of power, it is designed for users looking for more powerful bass reproduction.
- What improvements does the Footprint 01 Gen2 offer over the previous version? Quite a few. Barefoot has redesigned much of the monitor’s architecture, introducing new drivers, a new DSP platform and SPOC technology. These changes have improved precision, transparency and control. You can find a more detailed breakdown of the new features earlier in this article.







