Violet Design The Flamingo Jr

736,89 724,79 599,00+VAT

Professional Studio Microphone

SKU: vio4C Category:


“The Flamingo Junior” Series of studio microphones are side-addressed unidirectional microphones designed for professional audio recording where sound quality and musical character is of the utmost importance. “The Junior” uses a single-diaphragm cardioid electrostatic transducer, providing vintage tone with transparent highs, optimized vocal presence and fundamental low-frequency register with minimal proximity effect. The acoustically transparent head construction reduces internal resonances, optimizes the polar pattern and keeps sound details as close to unaffected as possible. There is an integrated shockmount within the head and an external compact studio shockmount included to reduce stand rumble, outside infrasonic interference and mechanical shocks.

The internal Class ‘A’ fully discrete, 48V phantom powered preamplifier provides high output, flat audio-response and ultra-low distortion and noise. A custom-wound large humbucking audio transformer balances the output circuits, isolates the microphone from external interference and adds “analog warmth” to the sound. Gold-plated contacts on the output XLR connector provide a noise-free connection.

“The Junior” is available in 2 styles. “The Flamingo Junior Standard” has a polished violet body and “The Flamingo Junior Vintage” has a matte black body. Matched stereo or surround sets can be special ordered. The use of an external pop filter is recommended for close vocals.


“The Flamingo Junior” has a medium bright tone and is designed for all-around recording studio applications including vocals and instrumental work. The custom-tuned frequency response has smooth enhancement at the lowest registers, mid-range at 2kHz – 3kHz, and also in the 12kHz region, yielding recordings with low-end punch and high-end air. You will find it to be very pleasing on a wide range of musical applications, especially as a vocal microphone when used with an external pop filter.

Technical Specifications

Diaphragm’s Diameter (inch/mm): 1″/26 mm
Polar Pattern Cardioid
Output Impedance 100 ohms
Rated Impedance 1000 ohms
Suggested Load Impedance > 250 ohms
Frequency Range 20 Hz to 20 kHz
Sensitivity @ 1000 Hz 20.5 mV/Pa
S/N Ratio CCIR 468-3 Weighted 76.5 dB
S/N Ratio DIN/IEC 651 A-weighted 87 db-A
Equivalent Noise Level 6.5 dB-A
Maximum SPL (<0.5% @ 1000 Hz) 134 dB
Preamplifier’s Dynamic Range 127.5 db
Electronics Type SS
Powering +48V Phantom or PSU PH
Polarity pin 2 in phase
Output Transformer Y
Output Connector XLR-3M
Dimensions (inch/mm) 8.26 x 1.88″/210 x 40 mm
Weight (lbs/grams) 1 lb/440 g
Included Accessories Microphone comes in a solid wooden box, with a GSM shockmount and a manual.
Optional Accessories: VSMJ Shockmount

Additional information

Weight 5 kg